BHDLS - PIGMENTED EPOXY POLY,F153,BLK RO1.8,F9P5K
- MSDS: BHDLS
- Manufacturer: SEAGRAVE COATINGS CORP OF VA SEAGUARD DIV
- Product Name: PIGMENTED EPOXY POLY,F153,BLK RO1.8,F9P5K
- National Stock Number: 8010-00-410-8464
Product Identification
Product ID:PIGMENTED EPOXY POLY,F153,BLK RO1.8,F9P5K
MSDS Date:08/10/1988
FSC:8010
NIIN:00-410-8464
Kit Part:Y
MSDS Number: BHDLS
Responsible Party
PORTSMOUTH, VA 23701
US
Emergency Phone: 1-800-424-9300
Info Phone: (804) 488-4411
Cage: 60163
Contractor
Telephone: 757-397-2223
Cage: 60163
Ingredients
N-BUTYL ALCOHOL (SARA III)
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 27.23%
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
AROMATIC HYDROCARBON 100
CAS: 64742-95-6
Fraction By Weight: 17.51%
ACGIH TLV: 200 PPM
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Effects of Overexposure:SKIN: IRRITATION, DERMATITIS, AND SEVERE BURNS
EYE: IRRITATE AND SEVERELY DAMAGE
BY SHORT CONTACT. INHALATION: IRRITATE
TISSUE OF THE ENTIR E RESPIRATORY TRACT.
First Aid
First Aid:SKIN: FLUSH AREA THOROUGHLY W/WATER; REMOVE CONTAMINATED
CLOTHING UNDER SAFETY SHOWER FOR GROSS CONTAMINATION. GET MEDICAL
HELP IF LARGE SKIN AREA CONTACTED ORIRRITATION PRESISTS.INGESTION:
GIVE DILU TED VINEGAR OR CITRUS JUICE TO DRINK. DO NOT INDUCE
VOMITINGFOLLOW WITH MILK OR OLIVE OIL, OR EGG WHITES AND WATER.GET
MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:SCC
Flash Point:101F/38.33C
Upper Limits:0.7
Extinguishing Media:CO2, WATER FOG, STEAM, FOAM, DRY CHEMICAL. COOL
FIRE EXPOSEDMETAL CONTAINERS WITH A WATER SPRAY.
Fire Fighting Procedures:FIREFIGHTERS MUST WEAR S.C.B.A. TO PROTECT
AGAINST SOLVENT VAPORS AND NITROGEN CONTAINING DECOMPOSITION
PRODUCTS.
Unusual Fire/Explosion Hazard:WHEN THIS MATERIAL IS INVOLVED IN A FIRE,
TOXIC DEGRADATION PRODUCTS CAN BE PRODUCED, INCLUDING CO2, CO,
HCHO, AND SIO2.
Accidental Release
Spill Release Procedures:SWEEP OR SCOOP UP SOLID SPILLS FOR DISPOSAL OR
RECOVERY. PICK UP LIQ SPILLS W/SAND OR ABSORBENT SOLID FOR
LANDFILL DISPOSAL. FLUSH TRACES WITH WATER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM SOURCES OF HEAT.
PROTECT CONTAINERSAGAINST PHYSICAL DAMAGE. PROPERLY VENT LIQUID
STORAGE.
Other Precautions:STORE APPROVED LIQUID CONTAINERS IN A WELL VENTILATED
LOW FIRE RISK AREA AWAY FROM COMBUSTIBLE AND CORROSIVE CHEMICALS.
PREVENT SKIN CONTACT WITH PAINT.
Exposure Controls
Respiratory Protection:CHEMICAL CARTRIDGE RESPIRATOR OR AIR SUPPLIED OR
SELF CONTAINED RESPIRATOR. A FULL FACE MASK IS NEEDED TO PREVENT
EYE IRRITATION FROM VAPORS.
Ventilation:GENERAL/LOCAL EXHAUST TO KEEP WORK PLACE VAPORS AT A
MINIMUM
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES/GOGGLES W/FACE SHIELD
Other Protective Equipment:LONG SLEEVE W/BUTTONED COLLAR; APRON;
PROTECTIVE CREAM ON AREAS OF SKIN EXPOSED TO DUST.
Supplemental Safety and Health
NK
Chemical Properties
Boiling Pt:B.P. Text:244F
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NONE
Appearance and Odor:BLACK LIQUID, AROMATIC AND ALCOHOL ODOR
Percent Volatiles by Volume:39
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HIGH TEMPERATURES
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE,
AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.